The flap gate, HW-ISG-D1, is one of the classical style in ISG series, high security. The perfect fusion of elegant appearance and any architectural style shows the feeling of trustworthiness. It is used in the places for satisfying the demand of a high traffic flow, a higher level of security and strict access control.
The brushless DC servo technology and the professional-grade speed reducer are used to make service life reach up to 5 million cycles and almost no noise. The infrared sensor is used to achieve anti-tailgating and anti-pinch, the minimal detection distance is up to 10 cm, high security. In addition to the unique appearance design, its function can be expanded widely. The system can support cardback devices : IC/ID card reader, barcode scanner, ID reader and biometric identification etc, easy to connect with access control system, elevator system and intercom system.
Product Dimension
Sensor
It uses special infrared detection of flap gate,sensor points are up to 20 pairs(can be customized),divided into the transmitting terminal and the receiving terminal, installed at the two sides of flap gate, at the height of knees and waist, preventing unauthorized persons passing through different positions and height, when invasion or inadvertent intrusion, it will cause automatic alarm or close the door(can be customized).
Door Module and Control Unit
The advanced EPC is used to realize the link with the control process of flap gate;The control unit,self-developed by Hantech, is mainly used for controlling the whole process of flap gate such as the switch of the door unit,the infrared signal handling and the state of the indicator light etc.
The brushless dc servo motor, high-speed DSP, professional coded disk and speed reducer are used by the door module unit, showing S- shaped curve mode, thus, the door unit moves faster, more stable and more accurate, at the same time, supporting the user settings for the door running speed,position and other parameters. Its interface supports CAN bus, RS485 bus and digital I/O direct control etc, so as to input the corresponding product and the system secondly.
Control Mode
The system has four working modes:emergency mode, maintenance mode, Normally closed mode, Normally open mode.
Please see the details for each mode as follows:
Emergency mode:when the system is in the state of emergency, mainly use for handling contingencies.
Maintenance mode:when the system is in the state of maintenance, mainly use for cleaning and maintaining of flap gate.
Normally closed mode:When no people pass, the doors of flap gate are closed.
Normally open mode:When people pass, the doors of flap gate are open.
Card Reader Installation
The card reader not only can be installed on the surface of flap gate, but also can be embedded into the gate body, including interlock output of the card reader.
Console
When in emergency, the monitoring room can use the button or wireless switch to open all the doors of flap gate.
Alarm under the following conditions
Unauthorized passing- the person has no valid authorized card.
Reverse Passing - when the door opens, the person walks in the opposite direction.
Tailgating - when one person is authorized to pass, another follows by the front one into the lane
Fire Alarm
When the input signal of fire alarm is triggered, the gate door opens automatically. when power off, the flap gate is in free mode, the gate door can be opened manually.
Indicator Light
Equipped with LED indicator,it is showing passing status,the indicator installed in the right hand side of the gate is visible clearly.
When LED is green, it means valid certificates, can pass.
When LED is red, it means invalid certificates, can't pass.
Application
CBD business centers, government-enterprise office buildings, financial institutions, sports arenas and scenic spots etc.
Our product advantages
1. Technical advantages: brushless DC servo drive technology, special lane detection sensor, tracking detection algorithm of passing logic;
2. Functional advantages: tailgating detection, passing protection, successive passing, operating mode and passing mode;
3. Sophisticated manufacturing process;
4. Long service life, high reliability;
5. Customization, good after-sale service.
The brushless DC servo technology and the professional-grade speed reducer are used to make service life reach up to 5 million cycles and almost no noise. The infrared sensor is used to achieve anti-tailgating and anti-pinch, the minimal detection distance is up to 10 cm, high security. In addition to the unique appearance design, its function can be expanded widely. The system can support cardback devices : IC/ID card reader, barcode scanner, ID reader and biometric identification etc, easy to connect with access control system, elevator system and intercom system.
Product Dimension
Sensor
It uses special infrared detection of flap gate,sensor points are up to 20 pairs(can be customized),divided into the transmitting terminal and the receiving terminal, installed at the two sides of flap gate, at the height of knees and waist, preventing unauthorized persons passing through different positions and height, when invasion or inadvertent intrusion, it will cause automatic alarm or close the door(can be customized).
Door Module and Control Unit
The advanced EPC is used to realize the link with the control process of flap gate;The control unit,self-developed by Hantech, is mainly used for controlling the whole process of flap gate such as the switch of the door unit,the infrared signal handling and the state of the indicator light etc.
The brushless dc servo motor, high-speed DSP, professional coded disk and speed reducer are used by the door module unit, showing S- shaped curve mode, thus, the door unit moves faster, more stable and more accurate, at the same time, supporting the user settings for the door running speed,position and other parameters. Its interface supports CAN bus, RS485 bus and digital I/O direct control etc, so as to input the corresponding product and the system secondly.
Control Mode
The system has four working modes:emergency mode, maintenance mode, Normally closed mode, Normally open mode.
Please see the details for each mode as follows:
Emergency mode:when the system is in the state of emergency, mainly use for handling contingencies.
Maintenance mode:when the system is in the state of maintenance, mainly use for cleaning and maintaining of flap gate.
Normally closed mode:When no people pass, the doors of flap gate are closed.
Normally open mode:When people pass, the doors of flap gate are open.
Card Reader Installation
The card reader not only can be installed on the surface of flap gate, but also can be embedded into the gate body, including interlock output of the card reader.
Console
When in emergency, the monitoring room can use the button or wireless switch to open all the doors of flap gate.
Alarm under the following conditions
Unauthorized passing- the person has no valid authorized card.
Reverse Passing - when the door opens, the person walks in the opposite direction.
Tailgating - when one person is authorized to pass, another follows by the front one into the lane
Fire Alarm
When the input signal of fire alarm is triggered, the gate door opens automatically. when power off, the flap gate is in free mode, the gate door can be opened manually.
Indicator Light
Equipped with LED indicator,it is showing passing status,the indicator installed in the right hand side of the gate is visible clearly.
When LED is green, it means valid certificates, can pass.
When LED is red, it means invalid certificates, can't pass.
Application
CBD business centers, government-enterprise office buildings, financial institutions, sports arenas and scenic spots etc.
Product Dimension | 1200mm*300mm*1000mm (L*W*H) |
Lane Frame | National standard 2.0mm thickness brushed satin 304 stainless steel |
Lane Width | 530mm~600mm (can be customized) |
Motor Drive | Brushless DC servo motor |
Detection Technology | Sensor detection, sensor points 16 pair,anti-tailgating 50mm |
Service Life | >10,000,000 cycles |
MTBF (Mean Time Between Failure) | >2,000,000 cycles |
Traffic Flow Capacity | 20~60 people/min |
Communication Interface | TCP/IP, RS232, RS485, I/O, CAN bus |
Function Extension | Support the following devices: IC/ID card reader, ID reader, barcode reader |
Support cardback, door wing material can be optional |
Our product advantages
1. Technical advantages: brushless DC servo drive technology, special lane detection sensor, tracking detection algorithm of passing logic;
2. Functional advantages: tailgating detection, passing protection, successive passing, operating mode and passing mode;
3. Sophisticated manufacturing process;
4. Long service life, high reliability;
5. Customization, good after-sale service.